Bridgeview BALE KING 5300 Series Operator'S & Parts Manual Download Page 38

Page: 38 / 105

Bridgeview Manufacturing Inc.

Transportation

The Bale King 5300 can be safely towed on public roads, provided the following precautions are

met:

•

Tow vehicle and hitch must be rated at least 5300 lb gross, and 1600 lb tongue.

•

NEVER exceed 40 km/h (25 mph).

•

ALWAYS ensure that the safety chain is properly installed

•

Tow vehicle must have a 7-pin round trailer plug (or adaptor)

•

Plug in lights and check for proper function (flashing amber lights, red tail lights and

brake lights)

•

Ensure that the supplied SMV (Slow Moving Vehicle) sign is clearly visible from the rear

•

Lift the forks all the way up and install the safety locks

•

If applicable, the 3 Bale Kit should be closed as much as possible without hitting the fork.

•

If possible, the deflector should be in the folded position

•

Ensure that the deflector safety lock is installed

•

Ensure that the PTO and hydraulic hoses are properly secured

NOTE: With the deflector folded and no grain tank, the overall width of the processor is 8'-6".

Check with local authorities regarding transport on public roads. Follow all applicable laws

and regulations.

Summary of Contents for BALE KING 5300 Series










































































































Search results

Summary of Contents for BALE KING 5300 Series

Reviews:

Related manuals for BALE KING 5300 Series

Brands by name

Popular brands

Bridgeview BALE KING 5300 Series, Operator'S & Parts Manual

Search results

Summary of Contents for BALE KING 5300 Series

Reviews:

Related manuals for BALE KING 5300 Series

Brands by name

Popular brands