Bridgeview BALE KING 5300 Series Operator'S & Parts Manual Download Page 23

Page: 23 / 105

Bridgeview Manufacturing Inc.

Optional Total Ration Grain Tank (5300TR)

The Bale King 5300 has an available 40-bushel grain tank, which allows grain to be discharged on

top of a windrow of processed hay, or independently out the right side of the machine. This bolt-

on kit changes the processor to a 5300TR (Total Ration).

The tank is located on the left side of the machine and features a large opening, 5 ft off the

ground for easy filling. A flow control valve allows you to adjust the speed of the augers so that

you can meter the grain flow for different situations. It is recommended to determine your desired

rate based on driving speed and the flow rate of the tractor. Setting the valve to "0" will give no

grain, while setting it to "10" will be full speed.

The grain tank has the option of running using two, three, or four sets of hoses. Each hose

has a coloured marker to identify its function. They should be connected at best convenience for

the tractor's controls. Note that the hoses are paired by colour and the following tables show the

operation when pushing oil into the hose with the longer marker.

Summary of Contents for BALE KING 5300 Series










































































































Search results

Summary of Contents for BALE KING 5300 Series

Reviews:

Related manuals for BALE KING 5300 Series

Brands by name

Popular brands

Bridgeview BALE KING 5300 Series, Operator'S & Parts Manual

Search results

Summary of Contents for BALE KING 5300 Series

Reviews:

Related manuals for BALE KING 5300 Series

Brands by name

Popular brands