Bridgeview BALE KING 5300 Series Operator'S & Parts Manual Download Page 19

Page: 19 / 105

Bridgeview Manufacturing Inc.

Agitators

The Bale King is equipped with a flow divider/combiner and two hydraulic motors for turning the

bale.

Once the main rotor is turning at full speed the bale can be turned in either direction to

begin processing. The faster the bale is turned in either direction, the faster it will be processed.

It may be necessary to change direction of the bale when loose debris builds on either side of the

bale chamber. This will remove the loose debris preventing spillage from the machine. This is

especially true when processing soft core bales. By reversing direction regularly, soft core bales

will process more evenly.

If the tractor has a flow control, adjust the oil flow so that the agitators run at a low rate.

Adjust the flow as needed to find the best speed to process a bale (approximately 30 rpm or 12

gpm flow). Turning bales too fast can result in rotor overloading resulting in flail “backslap”

which in turn causes flail and bushing damage. High agitator speed may also cause damage to the

hydraulic motors and excessive twine and material build-up on the agitators.

Summary of Contents for BALE KING 5300 Series










































































































Search results

Summary of Contents for BALE KING 5300 Series

Reviews:

Related manuals for BALE KING 5300 Series

Brands by name

Popular brands

Bridgeview BALE KING 5300 Series, Operator'S & Parts Manual

Search results

Summary of Contents for BALE KING 5300 Series

Reviews:

Related manuals for BALE KING 5300 Series

Brands by name

Popular brands