BRT_AN_079 PanL Desk Manager 2.X User Guide
Version 1.0
Document Reference No.: BRT_000377
Clearance No.: BRT#179
193
Copyright © Bridgetek Pte Ltd
C.
PanL35L (PD35L) Desk Panel Display Setup
The following steps will guide you through to Set up PanL35L Display –
1.
Identify a flat surface to place PanL35L where the bottom RGB LED strip has good 180 degrees
visibility to users. Ensure that it is placed within Wi-Fi range and power socket is within reach.
Power up PD35L with the Micro-USB cable and power adaptor provided. A longer micro-USB
cable can be used in the event that the cable supplied is not sufficient.
2.
The RGB LED strip will be BLUE upon power up and will change to WHITE when Wi-Fi is ready to
connect (AP mode). Follow the on-boarding instructions.
Once on-board is done and the cables are neatly placed, peel of the adhesive tapes provided and
secure display.
(OPTIONAL).
The RGB LED Strip light should reflect the desk booking status below
if on-boarding and desk assigning procedure is done.
Green -
Available
Yellow -
Pending Claim
Red -
In Progress
1
2
Summary of Contents for PanL Desk Manager
Page 1: ......