manualshive.com logo in svg

BRG Precision Products DuraTime RC100, Technical Manual

The BRG Precision Products DuraTime RC100 is a cutting-edge electronic time clock system that ensures accurate timekeeping and efficiency. To fully understand the product's functionalities and maximize its benefits, don't forget to download the free Technical Manual from our website.

Share
Download
background image

 

 

 

62 

BRG Firmware License Agreement 

 

BRG Firmware, © Copyright 2000, BRG Precision Products, Inc. 

 

THE  FIRMWARE,  INCLUDING  ITS  CODE,  DOCUMENTATION,  APPEARANCE,  STRUCTURE  AND 
ORGANIZATION, IS A PROPRIETARY PRODUCT OF BRG PRECISION PRODUCTS, INC. AND IS PROTECTED 
BY  COPYRIGHT  AND  OTHER  LAWS.    TITLE  TO  THE  FIRMWARE,  OR  ANY  COPY,  MODIFICATION  OR 
MERGED  PORTION  OF  THE  FIRMWARE,  SHALL  AT  ALL  TIMES  REMAIN  WITH  BRG  PRECISION 
PRODUCTS, INC. 

 

License Agreement

 

BRG  Precision  Products,  Inc.  grants  the  purchaser  a  non-exclusive,  nontransferable  license  to  use  the  BRG  Firmware  (the 
"Software” program stored in processors and/or memory) on hardware manufactured by BRG Precision Product’s, Inc.  
 
The software is copyrighted.  You may not: rent, distribute or transfer copies of the software; modify, disassemble, decompile, 
extract from the hardware, or translate the software or documentation; make any copies of software modules for use with other 
programs. 
 
This license is effective until terminated.  You may terminate it at any time by discontinuing the use of the hardware containing 
the software.  It will also terminate automatically if you fail to comply with any of the terms and conditions of the Agreement.  
Upon termination of this license for any reason, you agree to discontinue the use of the software. 
 
This  Agreement  constitutes  the  entire  agreement  and  understanding  between  the  parties  and  supersedes  any  prior  agreements, 
representations, or understandings, whether oral or written, relating to the Software. 
 
This Agreement shall be governed by the laws of the State of Kansas. 

 

Limited Warranty

 

BRG Precision Products, Inc. warrants that the processors or memory use to store the software is free from physical defects in 
material and workmanship under normal use for a period of sixty days from the date of purchase.  
 
THE  WARRANTY  SET  FORTH  ABOVE  IS  EXCLUSIVE  AND  IN  LIEU  OF  ALL  OTHERS,  ORAL  OR  WRITTEN, 
EXPRESS  OR  IMPLIED.    BRG  PRECISION  PRODUCTS,  INC.  MAKES  NO  WARRANTY  OR  REPRESENTATION, 
EXPRESS,  IMPLIED  OR  STATUTORY  WITH  RESPECT  TO  THIS  SOFTWARE,  ITS  QUALITY,  PERFORMANCE, 
MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, THIS SOFTWARE IS SOLD "AS IS", AND YOU, 
THE LICENSEE, ARE ASSUMING THE ENTIRE RISK AS TO ITS QUALITY AND PERFORMANCE. 
 
IN  NO  EVENT  SHALL  BRG  PRECISION  PRODUCTS,  INC.  BE  LIABLE  FOR  DIRECT  OR  INDIRECT,  SPECIAL, 
INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE SOFTWARE OR FROM ANY 
ERROR OR DEFECT IN THE SOFTWARE OR ITS DOCUMENTATION, SUCH DAMAGES INCLUDE, BUT ARE NOT 
LIMITED  TO,  LOSS  OF  PROFIT,  LOSS  OF  SOFTWARE  OR  DATA,  AND  DAMAGE  TO  YOUR  MONITOR,  IN  NO 
EVENT SHALL BRG PRECISION PRODUCTS, INC.  LIABILITY EXCEED THE PRICE PAID FOR THE SOFTWARE. 
 
The above exclusions may not apply to you.  This warranty provides you with specific legal rights.  There may be other rights 
that you may have which vary from state to state. 

Summary of Contents for DuraTime RC100
































































Reviews:

No comments

Related manuals for DuraTime RC100

Sangean RCR-22 Operating Instruction preview
RCR-22
Brand: Sangean Pages: 78
THE MACHINES 760-240W-000 Installation And Operation Manual preview
760-240W-000
Brand: THE MACHINES Pages: 15
LA CROSSE CLOCK 404-3012TX Manual preview
404-3012TX
Brand: LA CROSSE CLOCK Pages: 4
RNIB CC36 Instructions Manual preview
CC36
Brand: RNIB Pages: 6
Bresser MyTime Duo Instruction Manual preview
MyTime Duo
Brand: Bresser Pages: 44
Sangean DCR-9 Operating Instruction preview
DCR-9
Brand: Sangean Pages: 116
Steffes THEBEN TR610 TOP2 1301007R Setting Instructions preview
THEBEN TR610 TOP2 1301007R
Brand: Steffes Pages: 4
Fadisol C-0522 Quick Start Manual preview
C-0522
Brand: Fadisol Pages: 4
Casio ID-11S Operation Manual preview
ID-11S
Brand: Casio Pages: 3
Bodet Time Cristalys Opalys 14 NTP Installation And Operating Instructions Manual preview
Cristalys Opalys 14 NTP
Brand: Bodet Time Pages: 32
Epson RA4000CE Manual preview
RA4000CE
Brand: Epson Pages: 47
Selva Movement GG Manual preview
Movement GG
Brand: Selva Pages: 3
TOWITOKO CHIPDRIVE extern Manual preview
CHIPDRIVE extern
Brand: TOWITOKO Pages: 48
Silvercrest KH 2321 Operating Instructions Manual preview
KH 2321
Brand: Silvercrest Pages: 10
Silvercrest KH 2254 Operating Instructions Manual preview
KH 2254
Brand: Silvercrest Pages: 14
Silvercrest KH 2236 Operating Instructions Manual preview
KH 2236
Brand: Silvercrest Pages: 12
Silvercrest KH 2190 Operating Instructions Manual preview
KH 2190
Brand: Silvercrest Pages: 24
Silvercrest KH 2217 Operating Instructions Manual preview
KH 2217
Brand: Silvercrest Pages: 28

Brands by name

Popular brands

Load more brands