26 / 32
12 Snooze function
1. When the alarm sound starts, press the ALARM/SNOOZE button to activate the Snooze function.
The Alarm will sound again after 5 minutes.
2. When the alarm sound starts, press the ALARM button or press and hold the ALARM/SNOOZE
button for approx. 3 seconds, to stop the alarm.
3. The alarm will be turned off automatically if no button is pressed within 2 minutes.
13 Receiving measurements automatically
Once the power supply is enabled, the base station will display the measurement readings. Readings
from the remote sensor will be displayed within 3 minutes after powering it on.
Read the detailed manual for more information about readings (see download information on page 2).
14 Manual measurement display
1. Press MEM button several times to display the saved values one after another.
2. Display order: MAX (highest value) temperature > MIN (lowest value) temperature > MAX (highest
value) humidity > MIN (lowest value) humidity
3. Press MEM button for approx. 3 seconds during highest or lowest value display to irrevocable de-
lete all saved values.
15 HI/LO Alert
HI/LO alert
are used to alert you of certain weather conditions. Once activated, an alarm sound is
trigger and the alert icon flashes as soon as a set value is reached.Supported areas and alarm types:
Area
Type of alert available
Indoor temperature
HI AL / LO AL
Outdoor temperature
HI AL / LO AL
Indoor humidity
HI AL / LO AL
Outdoor humidity
HI AL / LO AL
HI AL = High alert / LO AL = Low alert
HI/LO alert setting
1. Press the ALERT button for approx. 2 seconds and the current channel symbol starts flashing.
2. Press the +/CH- or -/MEM button to select IN (indoor) or CHANNEL 1-8.
3. Press ALERT button to confirm and continue to the next setting.
4. Settings order: Channel > HI temperature > LO temperature > HI humidity > LO humidity
5. Press the +/CH or -/MEM button to modify the value by 0.1 °C/°F for temperature or 1% for humid-
ity. Press and hold to quick adjust the value.
6. Press the ALARM button to activate or deactivate the Alarm for the currently selected HI/LO Alert.
7. Then finished, press the ALERT button for approx. 2 seconds to return to normal mode.
Silence the alarm
1. When alert is triggered, press the ALARM/SNOOZE, ALARM or ALERT button to stop the alert.
2. If you ignore the alarm, it will stop after 2 minutes by itself.
