18 / 32
7
Humidity value (in %)
(display mode select-
able)
8
Dew point symbol (will
be displayed when dew
point level is reached)
9
MIN symbol (will be dis-
played when lowest
value is reached)
10 ALERT symbol (will be
displayed on alarm set-
ting)
11 MAX symbol (will be
displayed when highest
value is reached)
12 Temperature value (dis-
play mode selectable)
13 Temperature unit (°C or
°F selectable)
14 Indoor climate indicator
6 Setting up power supply
1.
Remove the stand clip.
2.
Remove the battery compartment cover.
3.
Insert the batteries into the battery compartment. En-
sure that the battery polarity (+/-) is correct.
4.
Replace the battery compartment cover.
5.
Re-attach the stand clip.
7 Automatic measurement display
Measurements for the indoor area will be displayed on the
device once power supply was enabled.
Read the detailed manual for more information about read-
ings (see download information on page 2).
