Bresser 2010200 User Manual Download Page 8

Page: 8 / 104

www.bresser.de

Safety Instructions

IMPORTANT NOTE:

Familiarise yourself with this manual and read all the instructions it contains

before you start setting up and operating the machine. Failure to heed warnings

and instructions may result in personal injury, fire, and damage to the unit or

other property.

STRICTLY FOLLOW ALL SAFETY AND OTHER INSTRUCTIONS GIVEN IN
THIS MANUAL AT ALL TIMES!

Safety in the working environment

①

Keep the workplace clean!

②

Do not operate the 3D Printer in the presence of flammable liquids, gases or

dust

③

Keep children and untrained persons away from the 3D printer

Security of power supply

①

Operate the 3D Printer only from a earthed power outlet. Do not make any

changes to the power plug of the 3D Printer.

②

Do not operate the 3D printer in a hazy or humid environment.

Do not expose the 3D printer to direct sunlight.

③

Do not use the power cord for any purpose other than its intended use.

Summary of Contents for 2010200









































































































Search results

Summary of Contents for 2010200

Reviews:

Related manuals for 2010200

Brands by name

Popular brands

Bresser 2010200, User Manual

Search results

Summary of Contents for 2010200

Reviews:

Related manuals for 2010200

Brands by name

Popular brands