Page 1
BREL motors is part of:
Manual Brel 45mm standard radio motor
Type MR45
Read the manual before you begin the installation. If these instructions are not followed,
this may lead to defects and injury in which warranty can’t be claimed.
warning:
Children cannot recognize the dangers of electrical equipment and may therefore not work with it.
It is important to follow this instruction for your own safety.
1. Do not operate the motor in humid surroundings.
2. The motor must be installed correctly.
3. Keep the antenna in a good condition and do not shorten. The antenna should not come into contact with other metal parts
otherwise it will reduce the effect.
4. The motor must be protected from direct moisture influences.
5. The motor should be installed with the motor cable down in order to prevent moisture via the motor cable is running in the
motor . See Figure 1
6. It is prohibited to connect two motors on a switch without using a relay control.
Figure 1
______________________________________________________________________________
Technical data of the motor
Type MR45-20
Type MR45-40
•
Motor Voltage:
AC 230V
AC 230V
•
Power:
145 Watt
198 Watt
•
Torque:
20 Nm
40 Nm
•
Speed:
15 rpm
15 rpm
•
Ampèrage:
0.64 A
0.86 A
•
Moisture and dust:
IP44
IP44
•
Working temperature of the motor:
o
Normal use:
-10
℃
tot +40
℃
o
Heavy use:
-20
℃
tot +70
℃
