Settings 25
Cirrus G5
31
max 35 mm
max 35 mm
32
5.3 Adjusting the brakes
The brakes that are supplied with the
wheelchair will not normally need to be
adjusted.
•
Loosen the screw
.
• Move the entire brake in the track to the
desired position.
•
The correct distance between the brake
block and the wheel is approx. 5 mm.
•
Re-tighten the screw.
5.4 Adjusting the anti-tip stabiliser
Adjusting the anti-tip device when changing
the chair’s centre of gravity. There should be a
maximum of 35 mm from the end of the anti-tip
device to the floor.
Length adjustment
•
Push the snap lock
.
•
Pull or push the anti-tip device to the correct
position.
Angle adjustment
The anti-tip device can be adjusted to three
different angles.
•
Loosen the screw
.
•
Unscrew the screw
. Move the screw
to
the hole that gives the desired angle.
Re-tighten
and
.
Summary of Contents for Cirrus G5
Page 1: ...Cirrus G5 User manual Manual wheelchair MB3171 EN ...
Page 2: ...2 Cirrus G5 ...
Page 37: ...Cirrus G5 37 ...
Page 47: ...Cirrus G5 47 ...
