Breezy Cirrus G5 User Manual Download | Manualshive

Page: 13 / 48

background image

Use of the wheelchair

13

Cirrus G5

9

10

11

4.5 Swing out/attach/remove the

leg supports

The procedure is the same for fixed and angle

adjustable leg supports.

The leg supports can be swung in/out or

removed in order to make transport and getting

in and out of the chair easier. The leg supports

can be released by twisting the lever

inwards

or outwards.

The leg support can be lifted straight up and

completely removed if desired. In order to

attach it again, carry out these steps in reverse

order, and the handle will lock automatically.

The complete leg support unit and fastenings

can be removed, see “5.10 Adjusting the seat

depth/upper leg length by moving the leg

support fitting” on page 28.

4.6 Adjusting the legrest angle

and the calf support - Angle

adjustable legrest

Adjusting the legrest angle

The legrests can be adjusted separately.

•

Loosen the lever

• Adjust to desired angle and tighten the lever

Adjusting the calf support

The calf support

can be depth adjusted and

sideways adjusted.

Warning!

Squeezing hazard!

«
...
11
12
13
14
15
...
»

Summary of Contents for Cirrus G5

















































Reviews:

No comments

Related manuals for Cirrus G5

Brand: Timago Pages: 10

Brand: max mobility Pages: 8

Rigid Aero Z Series

Brand: TiLite Pages: 102

Brand: Levo AG Pages: 33

Brand: MINOS Pages: 62

WHEELCHAIR Series

Brand: Paravan Pages: 160

Brand: Days Pages: 8

Brand: Mo-vis Pages: 14

Brand: WOLTURNUS Pages: 22

Smart Seat 932059

Brand: Sunrise Medical Pages: 1

Switch-it Cool Cube

Brand: Sunrise Medical Pages: 12

Wheelchair Quickie V-121

Brand: Sunrise Medical Pages: 23

Sedeo Pro Omni 2

Brand: Sunrise Medical Pages: 25

Quickie Ti Titanium

Brand: Sunrise Medical Pages: 22

SOPUR Xenon2 FF

Brand: Sunrise Medical Pages: 120

Quickie Sopur Easy Max

Brand: Sunrise Medical Pages: 152

Brand: max mobility Pages: 15

smartdrive mx1+

Brand: max mobility Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands