10
Use of the wheelchair
Cirrus G5
3
4
4 Use of the wheelchair
4.1 Quick-release axle
The wheelchair has a quick-release axle on the
driving wheels. Press the button in the middle
of the driving wheel in order to remove or attach
the wheel.
Note!
Check that the wheel is properly secured
by ensuring that the button pops out
approximately 5 mm when the wheel bolt is
completely in the casing.
4.2 Push bar - height adjustable
Adjusting the height of the push bar
•
Loosen the locking handles
at the same
time as pulling the push bar upwards or
pushing it downwards to the desired height.
•
Re-tighten the locking handle.
Removing the push bar
For extra safety, the push bar is equipped with
a snap lock in the topmost position.
• To remove the push bar, pull the push bar
to the highest position then squeeze in the
snap lock
.
Warning
!
Do not put pressure on the push bar when
negotiating kerbs. Place one foot on the
tipping bar to tilt the wheelchair whilst
steering with the pushing bar. See “4.14
Summary of Contents for Cirrus G5
Page 1: ...Cirrus G5 User manual Manual wheelchair MB3171 EN ...
Page 2: ...2 Cirrus G5 ...
Page 37: ...Cirrus G5 37 ...
Page 47: ...Cirrus G5 47 ...