Volledige bedieningshandleiding 2
© Bredenoord 2017
9
6
Operating instructions
This chapter discusses the operating instructions of the ESaver.
Always follow the maintenance instructions, which can be found in the maintenance chapter of this manual,
before use.
The ESaver III is only permitted to be operated by qualified and adequately trained personnel that is
authorized by the customer.
Take care that the maximum load to switch does not exceed the maximum step load of the ESaver
III! (see technical data)
6.1
Starting and stopping
Starting
·
Ensure that the diesel genset can automatically start by means of the connector (5)
(see operation manual diesel genset or start-stop module)
·
Turn the selector switch (1) to “ON”.
·
Press the button "START" (2).
The ESaver starts!
·
Switch on the main switch (4)
Stopping
·
Switch off the main switch (4)
·
Press the button "STOP" (3).
The ESaver stops!
·
Turn the selector switch (1) to “OFF”
Alarm reset
·
Turn the selector switch (1) to “OFF”
·
Turn the selector switch (1) to “ON”
·
Press the button "START" (2).
The ESaver starts!
·
Switch on the main switch (4)