7
Start-up
7.1
Safety notes
Initial commissioning
For initial commissioning, the following principles apply:
•
The cleaner must be completely assembled and correctly adjusted. All screw
connections must be securely tightened.
•
Reliably secure machine parts which have already been connected against
inadvertently being switched on.
•
After conversion of the cleaner, residual risks must be reassessed.
Commissioning
For commissioning, the following principles apply:
•
Only allow properly qualified staff to set the cleaner into operation.
•
Make sure that all connections are functioning properly.
•
When the cleaner is switched on, the danger zones must be free.
•
Remove any liquids that have escaped without leaving residues.
7.2
Commissioning
Prerequisite:
•
Avoid water hammers in the supply pipe.
Caution!
Hot and aggressive liquids are discharged from the cleaner!
Risk of injury
► Make sure nobody stands in the area of action of the nozzles.
► The cleaner may only be operated in a container intended for this
purpose.
Carry out the following steps:
1.
Connect the cleaner and set it into operation.
•
Done.
Hint!
Noise generated when the cleaning jets hit the tank wall can cause
discomfort and stress in the immediate vicinity.
Start-up
Safety notes
430BAL011762EN_2
28
28.05.2018