3. Connect the hose to the port on the appliance and the port on the canister lid.
4. Close the lid of the appliance
and choose “Marinate” function.
5.
Press “Start” button.
6. When it reaches the vacuum pressure, the appliance will stop vacuumizing
automatically and then release air into the canister. This working cycle repeats
continually for 30 minutes and then stops automatically.
7. The appliance vacuums the canister again. The above mentioned cycle will be run two
times.
8. Press
“Off” button to stop all working processes and turn off the appliance.
Care & Cleaning
1. Always switch off and unplug the appliance and wait some minutes to let it cool down
before cleaning.
2. Do not touch the heating bar or sealing bar shortly after operation.
3. Always wipe off spilled liquids immediately. Do not spill or pour any liquids on or into
the appliance or power cable.
4. Do not immerse the appliance, power cable or plug in water or any other liquid.
5. Do not place the appliance or power cable on wet surfaces to avoid risk of electric
shock.
6. Do not use abrasives to clean the appliance or any part of it.
7. Clean the appliance immediately after each use to avoid that leftover food will stick to
the heating bar.
8. Ensure not to damage the vacuum gaskets, heating bar and sealing bar when cleaning
the appliance.
9. When disconnecting the power cable, do not pull the power cable, but always grasp
the plugs.
10. Wipe the vacuum chamber, heating bar and sealing bar with a soft damp cloth. In the
vacuum chamber there are tiny holes used for sucking out the air, ensure not to spill
any liquids into these holes.
11. To dry the vacuum gaskets, it is best to dab with a dry cloth to avoid damage.
12. Dry all parts thoroughly before you plug in and operate the appliance again.
13. Keep the upper lid of the appliance open when not in use
Summary of Contents for VR-200
Page 1: ...Bruksanvisning VR 200 PRO...
