AWT35-100089 Rev AA
6/25
2 Introduction
The MS1000-LCD is an electronic chair scale designed for either walking on or being wheeled on to be
weighed. The platform has adjustable locking feet and a deck with built-in, front and rear ramp angles.
The scale provides accurate weight with an easy-to-read LCD display, which can be easily mounted on
the MS1000 guide rail and powered using the included AC/DC power adaptor.
2.1 Unpacking
Carefully take the scale out of its package, make it sure it’s not damaged and all accessories are
included:
•
SBI 210-LCD Indicator
•
9 Vdc 600 mA Power supply with plug adaptor
•
MS1000 Platform, guide rail and bracket
•
Installation Manual and Safety Sheet
2.2. General Installation Guidelines
To get the best performance from the scale, place the MS1000 platform in a location that will not
degrade its accuracy.
•
Try to avoid placing the scale in direct sunlight or near air vents
•
Place the scale on a level flat surface. It is not advised to place the scale near vibrating machinery
•
Avoid unstable power sources. Do not use near large users of electricity.
2.2.1 Scale Installation
Refer to the Installation Manual (AWT35-501586 Rev AA) for the handrail and indicator bracket
installation instructions.
2.2.2 Levelling the Scale
Level the scale using the four adjustable feet on the bottom of the platform.
Always check the level prior to using scale.
2.3 Powering ON/OFF the Scale
With the charger plugged into the indicator, press the
ZERO/ON/OFF
key to turn the scale on.
Press and hold the
ZERO/ON/OFF
key for 5s to turn the scale off.
2.4 Error Codes
0
----------
Initial zero weight over max load (default, 100% F.S.)
-----------
Overload, >1004.5 lb or >501.8 kg (default, 100% F.S. + 9 divisions)
EEP.E# Mainboard / Memory fatal error #