11
How to Use
This product is for household use only.
Important: Your bread maker has an Intelligent Fuse™ system designed
to protect the motor from overheating. It will automatically shut
off the motor if there is an overheat risk. If this occurs, unplug the
appliance, wait a minimum of 20 minutes for it to cool down, and plug
in again following the instructions.
GETTING STARTED
• Remove packing materials, any stickers, and the plastic band around
the power plug.
• Please go to www.prodprotect.com/applica to register your warranty.
• Place bread maker on dry, stable, level surface away from heat and areas
where cooking grease or water may splatter on unit. Do not place near
edge of countertop. If placing beneath cabinets, make sure there is
enough room to open the lid without interference.
Important: Your bread maker will bake up at a 2-lb. loaf. Do not put
larger quantities of ingredients into bread pan. Bread will not mix
and bake correctly and bread maker may be damaged. (See maximum
ingredient amounts.
• Before first use, operate on Rapid White cycle without adding
ingredients to burn off manufacturing oils. (Follow instructions in
USING YOUR BREAD MAKER.)
Note: During first use, bread maker may smoke and/or emit an odor from
mineral oils used in manufacturing. This is normal.
MAXIMUM INGREDIENT AMOUNTS
• Bread cycles: approximately 5 cups
• Quick breads: 4 cups
• Dough cycle: 4
2/3
cups
• Jam: 3 cups of fruit mixture
BREAD PAN TIPS
Inserting bread pan
Note: Remember to insert kneading paddle first, then add all ingredients in
the order listed BEFORE inserting the bread pan into baking chamber.
Important: The collapsible kneading paddle may fall when ingredients
are added. This is normal. It will stand up when kneading begins.
• When inserting bread pan into bread maker, make sure to set firmly in
place.
Removing bread pan
• To remove bread pan from baking chamber, hold handle with an oven
mitt and lift straight up firmly.
Important: When you remove bread pan after baking, be sure to wear
oven mitts to prevent burning.
• After removing loaf (by turning bread pan upside down and shaking
gently), check to see that kneading paddle is removed from loaf. If it is
stuck in bread, allow bread to cool. Allow bread to cool before removing
the kneading paddle.
BK1065SQ_IB-and-Recipes_21897.indd 11
1/22/18 2:39 PM