BRC Group |
24 Armstrong Ave, Georgetown, ON L7G4R9 | 877-260-4309 | www.brc.group
1
201
9
R1
Step Operation
Motion
1
Press and hold
▲
&
▼
simultaneously
more than 3 seconds
Legs begin to move down at a half speed of normal operation
2
Keep pressing
▲
&
▼
Legs move down to the lowest position and rebound 2-5 mm,
then stop
3
Release
▲
&
▼
together
Initialization is completed
The initialization procedure must be completed before the first running after table is
installed or parts replaced
Step Operation
Motion
1
Press and hold
▲
Legs move up
2
Release
▲
Legs stop
3
Press and hold
▼
Legs move down
4
Release
▼
Legs stop
Step Operation
Motion
1
Press and hold
▲
or
▼，
then
release
Run the legs to the position you want the table surface to be
2
Click button S, then click button 1 or 2
or 3 within next 3 seconds
Position 1 or 2 or 3 is saved
Step Operation
Motion
1
Press and hold the button 1 or 2 or 3
Legs return to the corresponding position saved
Step Operation
Motion
1
Press and hold button S, then press
The height information will be changed between centimeters
1
2
3
S
29.0
Alta
Digital Handset Operation
1. Initialization procedure
2. Move table up & down
3. Set handset memory position
4. Operation of stored memory positions
5. Change handset display from centimeter to Inches
MEMORY
UP
DOWN
SET
MEMORY
DISPLAY
Step Operation
Motion
1
Press and hold
▲
&
▼
simultaneously
more than 3 seconds
Legs begin to move down at a half speed of normal operation
2
Keep pressing
▲
&
▼
Legs move down to the lowest position and rebound 2-5 mm,
then stop
3
Release
▲
&
▼
together
Initialization is completed
The initialization procedure must be completed before the first running after table is
installed or parts replaced
Step Operation
Motion
1
Press and hold
▲
Legs move up
2
Release
▲
Legs stop
3
Press and hold
▼
Legs move down
4
Release
▼
Legs stop
Step Operation
Motion
1
Press and hold
▲
or
▼，
then
release
Run the legs to the position you want the table surface to be
2
Click button S, then click button 1 or 2
or 3 within next 3 seconds
Position 1 or 2 or 3 is saved
Step Operation
Motion
1
Press and hold the button 1 or 2 or 3
Legs return to the corresponding position saved
Step Operation
Motion
1
Press and hold button S, then press
The height information will be changed between centimeters
The table must be initialized when installed or when components are replaced. This must be done
prior to operating the table for normal use.
