8
EN
AUTOMATIC EMERGENCY SWITCH-OFF
FUNCTION IF THE OUTGOING AIR IS TOO
HOT
• If the outgoing air temperature exceeds the
acceptable value, the automated thermal switch will
switch off the convection fan heater.
• Set the operation mode switch (4) to the position
«0» and unplug the unit, let the unit cool down
for approximately 15-25 minutes (the waiting time
depends on the room temperature), and only then
you can switch it on again.
• Make sure that the upper and bottom air grids are not
blocked with foreign objects.
• Insert the power plug into the mains socket and
switch the unit on.
• If the convection fan heater does not switch on, it
may be caused by another malfunction. In this case
apply to a service center for repairing of the unit.
PROTECTION FROM DROPPING
• If the convection fan heater accidentally falls or tilts
too much, the fall protection system will switch off
the unit.
• Set the convection fan heater into the vertical
position, and the unit will resume operation.
Note: -
place the unit on an even dry and steady
surface to prevent it from dropping.
CLEANING AND MAINTENANCE
• Before cleaning the convection fan heater, set the
operation mode switch (4) to the position «0», make
sure that the power cord is not connected to the
mains.
• Wipe the unit body with a slightly damp cloth and
then wipe it dry.
• Do not use liquid detergents, abrasive cleaners and
any solvents to clean the unit.
• To avoid the risk of electric shock provide that no
water or other liquid gets into the unit body.
• To clean the air grids, use a vacuum cleaner with a
corresponding attachment.
STORAGE
• After cleaning put the convection fan heater away for
storage in a dry cool place away from children and
disabled persons.
• Before using the convection fan heater next time, it
is recommended to check the heater operability and
integrity of the power cord and plug.
DELIVERY SET
1. Convection fan heater – 1 pc.
2. Feet – 2 pcs.
3. Mounting kit – 1 pc.
4. Working instruction – 1 pc.
