6
EN
• Do not repair the unit by yourself. Do not
disassemble the unit by yourself, if any malfunction
is detected, and after the unit was dropped, unplug it
and apply to the service center.
• To avoid damages, transport the unit in the original
package.
• Keep the unit in a dry cool place out of reach of
children and disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY, DO NOT USE THE UNIT FOR COMMERCIAL
OR LABORATORY PURPOSES.
BEFORE THE FIRST USE
After the unit’s transportation or storage at negative
temperature, unpack it and wait for at least 3 hours
before using it.
• Unpack the unit and remove all the packaging
materials.
• Keep the original package.
• Read the safety measures and operating
recommendations.
• Check the delivery set.
• Examine the unit for damages, in case of damage do
not plug it into the mains.
•
Make sure that specified specifications of power
supply voltage of the unit correspond to the
specifications of your mains. When using the unit in
the mains with 60 Hz frequency, the unit does not
need any additional settings.
• Wipe the fan heater body with a slightly damp cloth
and then wipe it dry.
USING THE FAN HEATER
•
Place the fan heater base (1) on a flat, dry and
steady surface.
• Do not place the fan heater on soft surfaces, such as
carpets with high pile, sofas or beds.
• The distance between the front grid of the fan heater
and the furniture should be at least m.
• To avoid mains overloading, do not switch on several
electrical appliances with high power consumption at
the same time.
• Insert the power plug into the mains socket.
• Set the operation mode switch (6) into the necessary
position:
-
«OFF» — the fan heater is off;
- « »
— fan mode;
- « »
— low power level for small rooms;
- « »
— high power level for large rooms;
- « » — fan operation mode with the body
oscillation;
- « » — low power level with the body
oscillation;
- « » — high power level with the body
oscillation.
• In the room heating mode turn the thermostat control
knob (7) clockwise until bumping «+». When the air
temperature in the room reaches the desired value,
