Bravetti EP493 Use And Care Instructions Manual Download Page 4

Before Using for the First Time

A. Make sure that you have read and understood the 

IMPORTANT SAFEGUARDS

section.

B. Remove all packing paper and plastic from unit.  

C. Using a soft cloth, gently wipe away all the dust particles from the outside of the 

Hotdog Maker.

2

How to Use Your Hotdog Maker

The Rotary Switch (1) has 4 settings (positions):

Position “0” - The unit is “Off”.
Position “I” - Hotdog. In this position the unit will start to steam the hotdogs.
Position “II” - Hotdog & Bun. In this position the unit will make steam & the bun heaters

will warm up.

Position “III” - Hotdog & Bun & Heating Pan. In this position all 3 functions will be on. (The Heating 

pan will warm up.)

Using the Unit as a Steamer

• Remove the hotdog container (#5) uncovering the water tank (#4) under it.
• Fill the water tank (#4) with water to the “MAX” level marked on its side. 

DO NOT OVERFILL

(See illustration below.)

• Open the container cover (#6).  Put the hotdogs / sausages into the hotdog container (#5).
• Put back the hotdog container (#5) in its place on top of the water tank (#4). 
• Turn the rotary switch (#1) to Position “I”.

It will take approximately 4 minutes for the hotdogs to be cooked.  If you use larger hotdogs it will 
take longer for them to be ready.
Make sure to refill the water tank (#4) with water when the unit is being used for long periods of time.

IMPORTANT

The unit should not be left “ON” with 

NO

water in its water tank (#4). 

CAUTION

The steam that comes from the steam holes that are on the covers is hot enough

to cause burns.  Please use caution when removing the covers. 

2

Reviews: