Braun perfusor compact, Service Manual

Page: 28 / 86

Service Program
3
3 - 8 Perfusor® compact, 3.0 gb
EEPROM Menu
1.
Read
(F3)
The data of the Perfusor® compact can be checked and
modified in the Service Program after they were read out.
Note
Successful transfer to the progam of calibration data is displayed
as follows in the footer:
[Version 5.5004]: The hyphens after the menu items SNr, PCal, and
LCal are replaced by the digit 1.
[Version 2.1.0.1]: The color of the fields SNr, PCal, and LCal
changes from red to green.
2.
Default
(F2)
Loads data of the Default file in the Service Program and
overwrites all previous settings. Therefore, settings which can
be changed should be read out and noted down
(see
“Checklist after Operation of the Service Program”
➨
p. 3 - 18) .
Recalibrate the unit and enter serial number.
3.
Write
(F7)
The modified values must be loaded in the Perfusor® compact
after calibration, modification of data or the serial number
was input. The status displays "SNr," "PCal," and "LAbg2"
must be selected.
Writing is acknowledged by a message box. Save the modified
data with menu item
File
➨
Save
onto a storage medium, if
necessary.
Note
After the EEPROM has been written to the color of Eep field in the
footer changes from red to green [Version 2.1.0.1].
Fig.: 3 - 6
[Version 5.5004] [Version 2.1.0.1]
3.0