Rev. 6.4 dated 2022-02
Software Released Version: 1
Part 1 • Page 8-2
Commissioning / Decommissioning
Part 1 – Operating Instructions
(Eco)RO Dia II
Part 1 • Chapter 8
8.4
Putting the machine out of operation
If the system is to be shut down for a longer period, it is recommended that the system be treated with
preservative.
After a longer period of standstill, the system is put into operation again as described under
chapter 3, paragraph 3. “Work prior to initial commissioning”.
8.5
Return and disposal
Figure 8-1:
Removing the battery
In accordance with legislative regulations, B. Braun Avitum AG offers to take back systems it supplies and
dispose of these as stipulated by legislation.
CAUTION
Please note
Part 1, chapter 8, paragraph 8.6 “Technical memo for PRESERVATION with
sodium metabisulphite” on preserving the system.
IMPORTANT When the system has been shut down for longer periods, it must be checked for possible
softener contamination.
Electrical medical devices are subject to the Waste Electrical and Electronic Equipment
guideline 2002/96 dated January 27, 2003, and must be disposed of in an environmentally
friendly manner.
The medical product contains a battery. Used batteries should be recycled. The battery is
located on the CPU (PCB with display) in the switch cabinet door and can be lifted off the
PCB using a screwdriver.
Carry out the following steps:
1. Switch the main switch to “0” (when main switch is set to “0”
→
voltage-free, after
battery insertion and system switch-on the date and time must be reset)
2. Unscrew the EMC cover
3. Replace the battery
Battery (1 pc. / item no. 40410)
CPU
Screwdriver
