Page 20B
Unfold for:
Lift W
iring Schematic
Hydraulic Parts List
Item Qty.
Description
Part
No.
1 1 Pump
Assembly
(M259
with
Reservoir/
with
Back-up pump)
87060-24V
2
1
Motor,
Pump
16504-IS
3
1
Valve, “Down” (with Solenoid)
16505
4
1
Clamp, Reservoir - H-48
17069
5
1
Reservoir Replacement Kit (Includes Item #10)
88188K
6
2
O-Ring (only), Hand Pump Mounting
17351
7
1
Hand Pump (Backup) with O-Rings (Includes Item #6)
87065
8
1
Handle with Grip
17206W
9
3
Screw, 1/4-20 x 1 3/4”, Allen Head
17352
10
1
Fitting, 3/8” Male NPT x 3/8” Barbed
87618
11
2
Clamp, Hose - 5/8” O.D. - Worm Drive
84325
12
1
Tubing, 3/8” x 5/8”, Tygothane - Clear
82066R012
13
1
Plug, 3/8” Plastic Hose
81580
14
1
Fitting, 90°-1/8” Male Pipe x 1/8” Barbed
87563
15
1
Tube, 1/4” O.D. x 1/8” I.D. - Plastic
81557R026
16
1
Plug, 1/8” Plastic Tube
81583
17
2
Adapter, 1/4” Male NPT x 7/16-20 Male JIC 37°
10130
18
1
Fitting, Tee, 7/16-20 Male JIC 37° (3)
30793
19
1
Hose Assembly, 1/4” - Female Swivel 7/16-20 JIC 37°
32785A-202
20
1
Fitting, 90° - 9/16-18 Male O-Ring x 7/16-20 JIC 37°
87622
21
1
Coupling, Hydraulic Quick Connect x 1/4” Female NPT
87614
22
1
Nipple, Hydraulic Quick Connect x 1/4” Female NPT
87615
23
1
Elbow, 90° - 1/4” NPT Street
10114
24
1
Nut, 9/16-18, Hex Jam
83077
25
1
Fitting Assembly, Bulk Head
73777A
26
1
Hose Assembly, 3/16” - Female Swivel 7/16-20 JIC 37°
915-5603-62.5
27
1
Fitting, 9/16” Male O-Ring x 7/16-20 Male JIC 37°
26787
28
2
Valve, Flow Control
87053
29
2
Adaptor, 916-18 Male O-Ring to 1/4” Male NPT
31646
30
1
Fitting, Tee - 1/4” Male NPT (1) x 1/4” Female NPT (2)
11340
31
1
Adapter, 7/16-20 Female O-Ring to 1/4-18 Male NPT
29305
32
1
Switch,
Pressure
Transducer
30426
33
2
Fitting, 90° - 1/4” Female Swivel NPT x 7/16-20 Male JIC 37°
26789
34
2
Cylinder, UVL Retracting
87055N
35
2
Hose Assembly, 1/8” - Female Swivel 7/16-20 JIC 37°
16004A-020
36
1
Clamp, Hose - Solenoid Mounting
29663
37
1
Solenoid, Up - Prestolite - Short
28308-24V
38
1
Diode Assembly, Up Solenoid
73906A
CONTACT REMOVAL
1. Remove orange wedge using
needle nose pliers or a hook shaped
wire to pull wedge straight out.
2. To remove the contacts, gently
pull wire backwards, while at the
same time releasing the locking
fi
nger by moving it away from the
contact with a screwdriver.
3. Hold the rear seal in place, as
removing the contact will displace
the seal
Page 19B
