Branson Sonifier 250, User Manual, Page: 37 / 135

4-12 100-214-239 Rev. A
Installation and Setup
4.4.3 Horn Amplitudes
Use the following charts to determine the correct system settings for the horns you are using.
Approximate Microtip Amplitudes
Suggested Amplitude Values for various Horns
Horn EDP No. Description
Amplitude Control Settings
10% 50% 100%
101-147-037
1/2" Diameter Tapped
Stepped Disruptor 21.0*
0.0008" 76.0*
0.0029" 145.0*
0.0057"
101-147-042
1/2" Diameter Solid
Catenoidal Disruptor 21.0*
0.0008" 76.0*
0.0029" 145.0*
0.0057"
101-147-041
1/2" Diameter Solid
Exponential Disruptor 10.0*
0.0004" 34.0*
0.0013 65.0*
0.0026”
101-147-039
3/8" Diameter Solid Stepped
Disruptor 36.0*
0.0014" 125.0*
0.0049" 240.0*
0.0094”
101-147-043
3/4” Diameter Solid Stepped
Disruptor 9.5*
0.0004” 33.0*
0.0013” 63.0*
0.0025”
101-147-035
3/4” Diameter Solid High Gain
Disruptor 19.0*
0.0007” 68.5*
0.0027” 130.0*
0.0051”
101-147-044
1.0” Diameter Solid Stepped
Disruptor 6.3*
0.0002” 21.5*
0.0008” 40.5*
0.0016”
* All measurements in microns unless otherwise specified
Horn EDP No. Description
Amplitude Control Settings
10% 40% 70%
101-148-062 1/8” Diameter Tapered
116.0*
0.0046” 306.0*
0.0122” 494.0*
0.0194”
101-148-069 3/16” Diameter Tapered
59.5*
0.0023 183.0*
0.0072” 302.0*
0.0119”
101-148-070 1/4” Diameter Tapered
59.5*
0.0023” 151.0*
0.0059 247.0*
0.0097”
101-063-212 Double Step
64.0*
0.0025” 173.8*
0.0068” 274.0*
0.0108”
* All measurements in microns unless otherwise specified