Branson Sonifier 250, User Manual, Page: 20 / 135

100-214-239 Rev. A 2-7
Controls and Commands
Digital Sonifier
Clear Key
The Clear key on the Digital Sonifier is active at any time when a parameter can be changed.
If you press the Clear key when you are modifying a parameter value, the entry field becomes
blank, and the cursor is moved to the least significant position. If you press the Enter key while
the entry field is blank, no value is stored for the parameter.
Numeric Keys
The keys for 1 through 9 and 0 are active at any time when a parameter has been selected to
be changed.
2.2.2 Remote Terminal Commands
This table describes the remote terminal commands and their functions. All of the remote ter-
minal commands must be preceded by an exclamation point. Refer to
Chapter 6
,
Operations
, for
a description of the system’s response to each of these commands and the actions you should
take at each response.
Table 2-1: Remote Terminal Commands
Send this
command...
When you want to...
!T Enter the TIME duration value.
!MT Enter the MAXIMUM TEMPERATURE value.
!PO Enter the PULSE ON time value.
!POF Enter the PULSE OFF time value.
!PPT Enter the Pulse Temperature value.
!S Send all report data to the remote terminal.
!P Print all report data, if a printer is enabled.
!R Recall a particular preset.
!H
Pause operation of the Digital Sonifier until you send another !H
command.
!MT Enter the Maximum Temperature value.
!TS Test the system for two seconds.
!ON Start the experiment.
!OFF Stop the experiment.
!KL
Lock out the keypad on the front panel. The keypad is enabled
again if you send another !KL command, or if you turn the power off
on the Digital Sonifier and then turn it on.
!SV Save the parameters entered.
!RP View all the test or experiment parameter values.