Branson 2000X ao, Instruction Manual, Page: 47 / 112

100-214-281 Rev. 07 4-3
2000X ao Actuator Chapter 4: Installation and Setup
Instruction Manual Handling and Unpacking
4.2.1 Unpack the Stand or Actuator
The stand (or actuator) is heavy and packed in a protective shipping container. The actuator toolkit is packed
with the actuator. A booster, converter and other components may be packed inside the shipping container
(depending on the equipment ordered).
• Stands are shipped on a wooden pallet with a cardboard box cover.
• Actuators (alone) are shipped in a rigid cardboard box using protective foam shells for sup-
port.
Depending on which one of the following options applies to you, unpack the Branson actuator assembly:
4.2.2 Stand (actuator on a base)
CAUTION
!
Heed the “This End Up” arrows and the “Open Top First” instructions. The packaging is
designed to be removed from the assemblies from an upright orientation only.
Figure 4.1 Unpacking the Stand (Actuator on a Base); Right-side View of Stand
wood block
for shipping
Actuator
Column
Base
Actuator
Support
Spring Swivel
6-1/2 in.
Tool Kit
Converter
Booster
18in.
Protective
Box
wood block
for shipping
53in.
32-1/2in.
Insert
Box