BRANNSTROM CleanTrack 1000 B, Operation And Technical Manual, Page: 12 / 232

Brannstrom Sweden AB CleanTrack 1000B - Rev 2.20xd, 2019 Page 12 of 232
4.a. Sample pump SPP-100 with Explosion proof electric motor:
Supply voltage 400 VAC,50 Hz / 440 VAC,60 Hz 3-phase
Current 1.4 A / 1.5 A
Power Consumption 0.55 kW / 0.66 kW
Cos φ 0.78
Speed 2840 rpm / 3400 rpm
Sample flow 600 l/h (nominal)
Sample temp. 0 - +65 ºC
Ambient temp. -20 - +55 ºC
Ingress Protection IP66
Weight ~11.5 kg
Dimensions approx. 300 x 140 x 200 mm
Ex. class II 1 G Ex d IIC T4 Ga
Details See chapter 10.4. SPP-100 Sample pump with Ex. Motor page 119
and 12.8. Sample Pump, SPP-100 with Elprom explosion proof motor page 201 .
4.b. Sample pump Nikuni 32MED22/Matre P06 for Bulkhead mounting:
Note that different motors might be used for these pumps over and technical data might differ slightly from
the ones given below. Please read the marking plate of the actual motor.
Supply voltage 380-420 VAC,50 Hz / 440-480 VAC,60 Hz 3-phase
Current 4.53 A / 4.74 A
Power Consumption 2.2 kW / 2.53 kW
Cos φ 0.86
Speed 2850 rpm / 3440 rpm
Sample flow 900 l/h (nominal)
Sample temp. 0 - +65 ºC
Ambient temp. 0 - +40 ºC
Ingress Protection IP55
Weight ~59 kg
Dimensions approx. 600 x 280 x 410 mm
Details Nikuni: See chapter 10.5. Nikuni Sample pump for Bulkhead mounting page 121 .
Matre: See chapter 10.6. Matre Sample pump for Bulkhead mounting page 124 .
4.c. Sample pump Speck Y-2951 with Air driven Gast motor:
Air pressure 5.2 bar
Air consumption ~30 Nm³/h
Sample flow 240 l/h (nominal)
Sample Temp. 0 - +65 ºC
Ambient Temp. +1 - +40 ºC 2
Ingress Protection: IP56
Weight ~2.2 kg
Dimensions approx. 190 x 80 x 80 mm
Ex. class II 2 GDc T4
Details See chapter
12.9. Sample Pump, Speck pump with Gast air motor
page
228
.
2
If sample temperature is higher than the ambient temperature limit the limit becomes lower or cabinet should be ventilated.