28
MANUAL P/N 900000178 REV B
3.6
MCM Settings Page
Click the Settings tab to open the MCM Settings pages. The first settings subtab that
will be opened is the MCM IP settings
3.6.1
IP Settings
The MCM IP settings subtab (Figure 12) enables the user to enable or disable the
Ethernet ports on the MCM. In addition, this page is used to change the IP Address,
Gateway address, and subnet mask of each port. Please note that DHCP is not
supported, and the IP must be set manually.
NOTE
If the IP Address of the M212 is changed, the existing
connection to the previous IP address will no longer
work, to reconnect to the M212 web page, connect to
it at the new IP address.
Figure 12. MCM IP Settings Subtab
Summary of Contents for 0366003
Page 20: ...20 MANUAL P N 900000178 REV B Figure 5 M212 Settings Tab in Edit Mode...
Page 44: ...44 MANUAL P N 900000178 REV A 5 Front Panel Drawing Figure 24 M212 Front Panel Drawing...
Page 45: ...45 MANUAL P N 900000178 REV A 6 Rear Panel Drawings Figure 25 M212 Rear Panel Drawing...
Page 47: ......
