Brandt TV321BT1, Operating And Installation Manual

Page: 7 / 44

7
R esidual heat indicator
The display shows
H
.
After a prolonged power cut, a light display may
appear. It will turn itself of after pressing any
key for a while. However, the temperature of the
cooking areas may remain high.
WARNING
Do not touch these areas, risk of burns.
Using your hob in all simplicity
Locked
Controls can be locked:
- Either when turned off for cleaning.
- Or during use (the operations in progress
continue and the settings displayed stay active).
However when in the locked position, the "STOP"
touch control has priority and cuts off the power
to the hob.The display turns off after a few
seconds. It can be reactivated by touching any
touch control.
Unlocked
C
hild safety
A 0 show that the zone
concerned has been
turned on.
You can then choose the
desired power.
If you do not set the
power, the cooking zone
will turn itself off
automatically.
S
tart/Stop
S
etting manual power
A utomatic-Stop
Automatic stop is a safety function for your hob.
It starts up automatically if ever you forget to
turn off after cooking.
The letter A is displayed for the heating zone
concerned and the hob will bleep for about 2 mi-
nutes. The
A will continue to be displayed until
any control of the zone in question is touched.
The hob will then bleep twice to confirm your ac-
tion.
Power consumed The heating zone
goes out
automatically after
Between 1....4 8 hours
Between 5....7 2 hours
Between 8....9 1 hour
0
3 , 4 sec
3 , 4 sec
bleep
bleep
1...9
H