Brandt TI213BS1, Operating Manual, Page: 52 / 124

Each burner has its own
gas tap which is opened by
pressing down on the
control knob and then
turning it anti-clockwise
.
•Adjust the flame to the
height your require by
turning the control knob between the
and symbols .
•The gas tap is closed when the control knob is in
position
● ●
.
• Choose the gas burner you need using
the symbols at the side of each control
knob; (E.g. back right-hand burner ).
• Your hob is equipped with an
automatic lighting system
integrated into each control knob.
• To ignite a burner, press down and
turn the knob anti-clockwise
until it
is pointing to the maximum
position .
Keep the knob pressed down. This
will trigger off a series of sparks that
will light up the burner.
Using your hob in all simplicity
52
H
ow to use your gas burners?
- If ever your flame goes out, relight it as per normal procedure.
Sparker
Base of
burner
Natural gas
injector
Burner cap
Thermocouple
(Gas safety device)
(depending on model)
Burner
head
- The flames on the burner are smaller near the grate supports to avoid any damage being done
to the enamel.
- The noise made by certain burners is related to their power and burning gas; this does not
harm the quality of cooking in any way.
99625701_ML_B.qxd 19/11/04 09:02 Page 52