Brandt TI213BS1, Operating Manual

Page: 41 / 124

41
Installing your hob in all simplicity
Your hob can be installed above a
dishwasher on condition that you
take the following simple precau-
tions:
• The height of your worktop is 90 cm
or more.
• Cover the top of your dishwasher wi-
th an insulation plate to avoid any
particles coming from the latter's heat
insulators being sucked up by the hob
ventilators. This plate is supplied to After
Sales Service
.• You must ensure that a minimum
amount of fresh air gets to your induc-
tion hob, so that the hob ventilator can
cool the electronic components inside
correctly.
To do this, a cut-out of 30 cm² must be
made at the back of one of the sides of
the fitting recess (as shown opposite).
F
itting recommendations (cont'd)
●
Fitting above a dishwasher
Cut-out of 30 cm²
on the right
and/or on the left
Ambient air flow
Hot air flow
99625701_ML_B.qxd 19/11/04 09:02 Page 41