30
The gas connection must be installed in com-
pliance with applicable regulations in the
country of installation.
• Gas distributed by pipe; natural
gas,
For your safety, you must choose from the
three following connection options:
— Connection with a rigid pipe made from cop-
per and with screw-on mechanical connec-
tors (G1/2 gas standard mark). Make the con-
nection directly to the end of the elbow fitted
on the appliance.
— Connection with a flexible metal hose (stain-
less steel) with screw-on mechanical connec-
tors (compliant with NF D 36-121 standard)
whose service life is unlimited
(Fig. A).
— Connection with a flexible rubber hose rein-
forced with screw-on mechanical connectors
(compliant with the NF D 36-103 standard)
whose service life is 10 years
(Fig. B).
Warning
When connecting your hob’s gas sup-
ply, if you have to change the direction of
the elbow fitted on the appliance:
①
Change the gasket.
Screw on the elbow’s nut, careful not to
exceed a torque of 17 N.m.
GAS CONNECTION
•Preliminary comments
If your hob is installed above an oven or if proximity to other heating elements poses a threat of
overheating the connection, you absolutely must insulate the cable in a rigid pipe.
If a hose or soft pipe (in the case of butane gas) is used, it should not come into contact with a
moving part of the cabinet, nor should it pass through a location that may become blocked.
1 / INSTALLING YOUR APPLIANCE
•
@
@
À
À
Q
Q
¢
¢
Fig. A
Fig. B
Summary of Contents for TE 1416 Series
Page 1: ...GUIDE D UTILISATION Tabledecuisson...
Page 43: ...43 6 NOTES...
