29
ELECTRICAL CONNECTION
Your hob is sold with a power cable (type
H05V2V2F - T90, cross-section 1 mm²) with
three conductors (phase + neutral).
A f te r- s a l e s s e r v i c e r e f e r e n c e : 7 7 X 3 76 7
(6470.1516). It must be connected to a 220-
240 V~ monophase grid via a standardised
I E C 6 0 0 8 3 e l e c t r i c a l o u t l et w i t h p h a s e
+ neutral or or an all-pole cut-of f
device with a minimum distance between con-
tact openings of 3.5 mm.
The plug of the electr ical outlet must be
accessible after installation.
Warning
The safety wire (green/yellow) is con-
nected to the appliance’s ground terminal
and must be connected to the ground
lead
of the electrical set-up.
The fuse in your set-up must be
10 amperes.
If the power cable is damaged, it must be
replaced by a cable or a special kit avail-
able from the manufacturer or its After-
Sales Service Department.
Tip
In order to easily locate the reference
information for your appliance, we recom-
mend that you note them on the “After-
Sales Service Department and Customer
Relations” page (this page also explains to
you where to find this information on your
appliance).
1 / INSTALLING YOUR APPLIANCE
A
A
A
A
Place your hob in the opening of the support
cabinet, carefully pulling the table towards
you.
Reposition the burner heads, burner covers
and pan supports on the hob.
Connect your hob to the gas supply (See “Gas
Connection” chapter) and to the power supply
(See “Electrical Connection” chapter).
If you wish, you can immobilise the hob using
the four mounting brackets delivered with a
screw
(Fig. 02) to attach them to the four cor-
ners of the housing. You must use the holes
provided for this purpose, according to the
diagram above
(Fig. 01).
Stop screwing when the mounting bracket
starts to become deformed.
Do not use a screwdriver.
C
ABLE CROSS
-
SECTION TO BE USED
Fig. 01
Fig. 02
Mounting brackets
Underside view
of the housing
•
TIPS FOR FLUSH MOUNTING
Mounting brackets
A
•
Cabinet
H05V2V2F -T90 cable
Cross-section of
conductors in mm
²
Fuse
220-240 V~ - 50 Hz
Gas and dual
3 conductors
including one
ground wire
1
10 A
Summary of Contents for TE 1416 Series
Page 1: ...GUIDE D UTILISATION Tabledecuisson...
Page 43: ...43 6 NOTES...
