EN
4/USING YOUR APPLIANCE
10
Warning
We cannot be held responsible for any accident or incident
resulting from non-existent, defective or incorrect earthing.
If the electrical installation in your residence requires any
changes in order to hook up your appliance, call upon a
professional electrician.
If the oven malfunctions in any way, unplug the appliance or
remove the fuse corresponding to the sector where the oven is
hooked up.
Warning
The safety wire (green-yellow) is connected to the appliance’s terminal
and must
be connected to the ground lead of the electrical set-up.
In the case of connection to an electric wall socket, it must remain accessible after
installation.
The fuse in your set-up must be 16 amperes.
If the power cable is damaged, it must be replaced by the manufacturer, its After-Sales
Service Department or a similarly qualified person to avoid danger.
It must be possible to disconnect the appliance from the power
supply, either using a plug or by fitting a switch on the fixed
wiring system in accordance with installation rules.
