1 7
A DA S- 1 1 0 0 M A NUA L
[Calibrate camera angle for proper ADAS performance]
Notes:
! During calibration, the left and right lane
markings on the straight road should be visible.
! To calibrate at high accuracy, it is
recommended to drive on the flat and straight
road. If the camera is calibrated on a sloped road,
ADAS may not work as well as expected.
! The 1st calibration should be done while driving
above 40km/h, and the 2nd calibration should be
done while driving above 60km/h.
! If the 2nd calibration stage is not completed
properly, ADAS may not perform as well as
expected.
Drive 40km/h for 30
seconds on the road
with clear lane
markings
After lane detection,
drive 40km/h for 30
seconds again. A red
crossing icon will
appear on display to
indicate the 1st stage of
calibration is completed.
After the 1st stage of
calibration, drive
60km/h for 30 seconds.
The display will turn
Black for 1 or 4
seconds.
Afterward, the screen
will turn normal, and the
red crossing will turn
Blue, accompanied by a
voice message to
inform the driver of
calibration finish status.
