1 5
A DA S- 1 1 0 0 M A NUA L
[Installation option
| Type C - Hub Connection method
]
* Should be installed in a professional installation shop
* This instruction shows how to install the main body and essential accessories.
Please read carefully before attempting to install.
Installation Notice
! Make sure to connect product and cable when
the vehicle engine is OFF
! If optional devices are connected when the
vehicle power is being applied to Hub; it may
cause damages to the device.
! During camera installation and setup, keep
vehicle power in ACC condition.
! If the camera is reset in shaky conditions,
ADAS may not work correctly.
! After installation, drive 60km/h for around 1 min
on the road with clear lane markings to
automatically calibrate the camera.
ADAS functions may not work ideally if the
automatic calibration is not completed.
• Remove tape off
the bracket and
attach the main body
horizontally
• Attach the Hub and
connect cables to the
Hub
• Connect power cable
(refer to pin map)
• When connecting
optional devices, be
sure to connect to the
Hub first before
applying power
• After setup, the live-
view screen will
appear
