INSTALLATION INSTRUCTIONS
5000-CA14 instructions 7-15-2016
Page 1 of 4
GS
Curb Alert Parking Sensor for Corvette C7
(Kit # 5000-CA14)
Please read thoroughly before starting installation and check that kit contents are complete.
Items Included in the Kit:
Tools & Supplies Needed:
Main module
Buzzer/speaker
Front IR sensor
3M cleaning pad
Zip ties
Allen wrench
4 different mounts for IR sensor
6 wire guides/clamps
2 ringlets and nuts (attached to power harness)
Inline fuse holder (attached to power harness)
These instructions
Wire strippers
Wire cutters
Electrical tape
Zip ties
Plastic panel removal tools
Digital Volt Meter / BCM safe test light
Screwdriver
Socket set
Wrench
Safety Precautions:
•
Work in well ventilated area that is clear of obstructions.
•
Secure vehicle with tire chucks in both front and rear of tires.
•
Turn vehicle accessories OFF and ensure ignition key is in OFF position.
•
Wear safety goggles and snug fitting clothes.
•
Use tools only for their intended purpose and which are in good repair.
•
Only perform this task if confidence, skill, and physical ability permit.
NOTE: We strive to provide accurate and up-to-date installation instructions. For the latest full color
instructions, as well as an installation video, please visit www.brandmotion.com
