90
System User Guide Rev. 1.6 VectorVision
Camera Handle Drape
7.3.2
Draping the Camera Handle
How to Drape
Figure 45
Figure 46
Verifying the Drape
Verify that drape sits securely on camera handle and can only be removed by pushing
release button.
Verify that there is no gap between plastic foil and the plastic ring of the drape.
Steps
1.
Open packaging under sterile conditions.
2.
• Place camera handle drape on camera handle with one hand.
• Press release button
s
with the other hand.
• Push camera handle drape completely over release button and camera handle.
• Release the release button
a
.
3.
After draping, replace sterile gloves with new sterile gloves.
4.
Verify that drape sits securely on camera handle
f
and that there is no gap between the
plastic foil and the plastic ring
d
of the drape.
a
s
f
d
Summary of Contents for VectorVision
