Brainlab KICK 2, System And Technical User Manual

Page: 81 / 136

7.3 Cleaning the Camera Cart
Disinfectants
The Camera Cart except camera sensor, illuminators and camera unit shall be cleaned using the
following disinfectant types:
Disinfectant Type Example
Alcohol-based Meliseptol, Mikrozid AF Liquid
Alkylamine-based Incidin Plus 2%
Active oxygen-based Perform
Aldehyde/chloride-based Antiseptica Kombi - Flächendesinfektion
NOTE: Use only surface disinfectants released in your specific market.
NOTE: Surface disinfectants may leave a residue. This can be easily removed using a dry cloth.
How to Clean the Camera Cart
Step
1. Disconnect all cables from the Camera Cart .
2. With exception of the camera, clean all other surfaces using a surface disinfectant (see
list of Brainlab approved disinfectants). Follow disinfectant manufacturer's recommenda-
tions.
NOTE: Take care not to wipe debris from the camera case onto the illuminator filters and
lenses.
3. Carefully clean interfaces, ensuring that no liquids enter the Camera Cart .
4. After cleaning, ensure that the telescope post of the Camera Cart is completely dry be-
fore retracting the post.
How to Clean the Camera Protection Cover
①
Figure 36
Step
1. Undo the hook and loop straps
①
and remove the protection cover from the device.
2. Use a non-alcohol-based surface disinfectant to disinfect the surface (see list of Brainlab
approved disinfectants). Follow the disinfectant manufacturer’s recommendations.
NOTE: Use only a moist cloth to clean and disinfect surfaces. Do not allow the protection
cover to become soaked with disinfectant.
3. Allow the protection cover to fully dry before attaching it to the camera.
NOTE: After drying, surface disinfectants may leave stains.
CLEANING
System and Technical User Guide Rev. 1.0 Kick 2 Navigation Station Ver. 1.1 81