Brainlab KICK 2, System And Technical User Manual

Page: 71 / 136

6.3.3 Disassembling the Camera Cart
Before You Begin
Consider the weight of the components before beginning assembly and disassembly.
During assembly and disassembly, Camera Cart components should only be lifted by people who
are bodily able (e.g., not by pregnant women).
Apply protection cover over camera before disassembly.
How to Prepare the Camera Cart for Transport
② ③ ①
Step
1. Unplug mains power cable and disconnect cable from base station.
2. Place the telescopic camera arm at the minimum height position.
3. Disconnect the camera cable from the camera.
4. Press the release trigger on the camera handle and remove the camera from the post.
5. Pull the camera cable clip backwards to disconnect the spiral cable from the post.
If needed, gently stretch the spiral cable upward until it easily comes out of the post chan-
nel.
6. Pull up on the post fixation lever and remove the telescopic camera post from the Cam-
era Cart base.
Place the post into the shoulder bag.
7. Place the Camera Cart base into the corresponding case
②
.
8. Cover the metal connector of the spiral cable with the cloth bag
①
provided.
9. Place foam insert on top of the base, then insert camera
③
.
10. Fully close the zipper of the transport case.
ASSEMBLY, TRANSPORT AND STORAGE
System and Technical User Guide Rev. 1.0 Kick 2 Navigation Station Ver. 1.1 71