Brady Bradyprinter THT 300X-PLUS, Manual

Page: 153 / 180

Troubleshooting
Printer Diagnostics
Bradyprinter THT X-Plus II Series User Guide 125
PAUSE Self Test
This self test can be used to provide the test labels required when making adjustments
to the printer’s mechanical assemblies. See the sample printout below.
To perform a PAUSE self test, complete these steps:
1.
Turn Off ( O ) the printer.
2.
Press and hold
PAUSE
while turning the power On (
I
). Hold
PAUSE
until the
DATA
light turns off.
• The initial self test prints 15 labels at 2.4 in. (61 mm) per second, then
automatically pauses the printer. When
PAUSE
is pressed, an additional 15
labels print. The labels are like the one shown below.
• While the printer is paused, pressing
CANCEL
alters the self test. When
PAUSE
is pressed, 15 labels print at 6 in. or 152 mm per second.
• While the printer is paused, pressing
CANCEL
again alters the self test a
second time. When
PAUSE
is pressed, 50 labels print at 2.4 in. (61 mm per
second).
• While the printer is paused, pressing
CANCEL
again alters the self test a third
time. When
PAUSE
is pressed, 50 labels print at 6 in. (152 mm) per second.
• While the printer is paused, pressing
CANCEL
again alters the self test a
fourth time. When
PAUSE
is pressed, 15 labels print at the printer’s
maximum speed.
• To exit this self test at any time, press and hold
CANCEL
.