Brady Bradyprinter THT 300X-PLUS, Manual

Page: 123 / 180

Front Panel Controls
Front Panel LCD
Bradyprinter THT X-Plus II Series User Guide 95
RESYNCH MODE
Resynch Mode
This parameter determines how the printer reacts if the label synchronization
is lost and the label top is not where expected.
•
Feed Mode —If the label top is not where expected, the printer feeds a
blank label to find the label top position.
•
Error Mode —If the label top is not where expected, the printer stops,
enters Pause Mode, displays the message
Error Condition Feed Label
,
flashes the ERROR light, and asserts the Service Required signal (pin 10
on the Applicator Interface Connector).
To resynch the media to the top of the label in Error Mode, press
PAUSE
to exit Pause Mode. The
ERROR
light stops flashing, and the Service
Required signal is deactivated. The action of the printer is determined by
the
Head Close
configuration selection (see Head Close on page 89 ).
•
Press the right or left oval to toggle between choices.
Default: Feed Mode
Selections: Feed Mode, Error Mode
WEB S.
These parameters are automatically set during the calibration procedure. They
should be changed only by a qualified service technician. See the
Maintenance
Manual for more information on these parameters.
•
Press NEXT/SAVE to scroll through these parameters.
MEDIA S.
RIBBON S.
MARK S.
TAKE LABEL
MARK MED S.
MEDIA LED
RIBBON LED
MARK LED
LCD Description