*
Loading path for ribbon
Label guide
Platen
Media sensor
Open the printer right side cover.
Push the print head release lever
to open the print head mechanism.
(1)
Install the ribbon onto the ribbon
supply spindle. Thread the ribbon
through the ribbon sensor slot and
then through the open space in
between print head and platen.
(2)
Wrap the ribbon onto the ribbon
rewind spindle. Keeping the
ribbon flat and without wrinkles.
(3)
Wind the ribbon clockwise about
3~5 circles onto the ribbon rewind
spindle until it is smooth and
properly stretched.
(4)
(5)
Break the ribbon between ribbon
guide plate and the ribbon rewind
spindle.
(1)
Push the ribbon release button to
release the ribbon on the ribbon
rewind spindle.
(2)
Then, slide off the ribbon from
ribbon rewind spindle.
(3)
Note: The interface picture here is for reference only. Please refer to the product specification for the interfaces availability.
Loading the Ribbon
Printer Overview
Remove Used Ribbon
Centronics
interface
GPIO interface
(Option)
SD card
socket
Fan-fold paper
entrance chute
Ethernet interface
USB host
interface
USB
interface
RS-232C
interface
Power jack
socket
Power switch
Media view
window
Paper exit
chute
Operatiion
buttons
Touch
screen
LED indicators
Printer right side cover
Media guide bar
3” Label
supply spindle
Label roll
guard
Ribbon supply
spindle
Internal rewind
spindle
(option)
Ribbon
release
button
Damper
Print head pressure
adjustment knobs
Ribbon
rewind
spindle
Ribbon
sensor
Print head
release lever
Media sensor
lock lever
Print head
Close the print head mechanism
by pushing the both sides of print
head mechanism. Make sure the
latches are engaged securely.
Thermal Transfer / Direct Thermal
Barcode Printer
Quick Start Guide
