Installation
LVSD2
Bradley
• 215-1829 Rev. E: ECO 22-08-005
9/1/2022
11
Adjust Temperature with Water Running
6
H
C
A
Loosen cap screw about
¹⁄₄
" (4–6 turns)
and lift up cover (do not remove).
B
Using cover, turn cartridge gently until
desired water temperature is reached.
Do not turn past stops as this may
damage unit. Push cover down and
tighten screw.
WARNING This valve is NOT factory preset. Upon installation, the
temperature of this valve must be checked and adjusted
to ensure delivery of a safe water temperature. Water in
excess of 110°F (43°C) may cause scalding.
Strainer and P-Trap
5
Strainer
Thread the strainer screw through
the strainer and into the stand off
on the drain adapter.
A
Ensure not to overtighten the strainer screw.
Install supplied P-trap to drain adapter.
B
