LVAD3
Installation
12
4/17/2017
Bradley
• 215-1851 Rev. A; ECN 17-08-002
Install access panel brackets
to wall using #10 fasteners
(supplied by installer) as
shown in rough in drawing.
Install top screw into slot. Do
not install bottom screw until
Step C is complete.
A
Make all connections before installing access panel.
Access Panel
7
#10 Top
Screw
Shown in closed
position. Rotate
90° to Open
Insert #10 thumbscrews
into front bowl apron as
shown. Thumbscrew in
vertical position is closed.
Thumbscrew in horizontal
position is open.
B
Hang access panel onto
mounting brackets attached
to the wall on the left and
right sides. Rotate panel up
and check fitup between
thumbscrews and panel slots.
Rotate access panel down
and make adjustment to
brackets if necessary. Install
bottom #10 fastener into
brackets.
C
Rotate access panel up
and secure by rotating
thumbscrews to the closed
position.
E
To open access panel, rotate
thumb screw, slightly push
panel up and swing access
panel down. Do not remove
thumbscrews.
F
#10
Thumb
Screw
CAUTION For applications where children are present or for applications
subject to vandalism, order security screw option S45-2880.
Attach P-trap to drain adapter
and waste outlet.
D
For ease of installation, lift trap cover up at bottom, while positioning
over thumb screw. Start at center and move left to right.
