Available Controls
Pan, Tilt, Zoom, Focus, Iris (auto/manual), Pan & Tilt Speeds, Pan & Tilt reverse direction, 99 x
preset positions of Pan, Tilt, Zoom & Focus. White Balance (Auto, ATW, 5k6, 3k2, Manual),
Red Gain, Blue Gain, Detail, Shutter, Master Gain, Gamma, Chroma Hi/Low, Master Pedestal,
R.Ped, B.Ped, Invert, Mirror, E.Stab On/Off, Tally On/Off, Catch Light On/Off.
The IRIS has an 18 step range adjustment. The controllers should be set to 18step not 255
step.
The camera can be set to various HD standards. 1080p outputs are only available as
component on the 15way Dsub connector.
Pan & Tilt Speeds
The latest versions (from Ser.No. BE_121098) all have 10 speed ranges. Both Pan and Tilt
speed ranges move up and down together.
Speed 10
is intended for fast sport applications
and has a faster reaction time but does not have feedback motor control.
Speed 9
gives the
same top speed, a smoother uptake and full feedback speed control.
All previous versions can be upgraded to the latest software version.
Blue Status LED
The blue LED on the side of the unit indicates the status of the unit.
On power up the LED will flash 3 times. This indicates that power is OK and the
microprocessors are functioning correctly.
Slow flashing (1 on and 1 off per second)
-
No data or incorrect data
Continuous on
-
System Data OK but not being addressed
Fast flashing (25 times per second)
-
Camera being addressed by controller
Specifications
Weight:
1.5kg
Data:
RS485. Max. cable length 1km.
Power:
12-16v - 12w max.
Outputs:
High Definition
1080i/50, 1080i/59.94, 720p/50,
720p/59.94, - HDSDI (10 bit)
1080p/50/60 - component only
Camera:
4 Megapixel HD CMOS chip.
S/N >50dB
Latency < 2 frames
Jitter < 0.04 UI
Lens:
10:1 Zoom, 51deg. - 5.1deg. (16:9).
Distortion:
<3% (wide)
F.1.8 - 28 (17 steps)
Operating Temp:
-10 to +40degC ambient
P a g e 4
P a g e 1
