6
Bradley Corporation • 215-1372 Rev. F; EN 03-045
Terreon® Tri-Fount™ Wall-Hung Washfountain with Battery-Operated Infrared Control
MF2939/BIR
Installation Instructions
9-17-2003
Installation Instructions continued . . .
Step 3: Install pedestal panels
1. Install three 1/4-20 x 1/2" screws (provided) on each pedestal panel so that about 3/16" of each
screw is exposed. DO NOT tighten screws (see Figure 3).
2. Slide each of the pedestals onto the frame assembly so that the exposed portions of the screws fit
into the slots on the frame assembly. Slide the pedestal panel toward the wall until the screws fit
in the narrow end of the notches in the frame assembly.
3. Tighten the screws to secure the pedestal panels to the frame assembly.
4. Attach the battery box valve bracket to the side panel pad (one per side) using the 1/4-20 screw
and 5/16 lockwasher provided. Slide the battery box onto the bracket (see Figure 3).
Figure 3
Frame
Left
pedestal
panel
Right
pedestal
panel
Battery valve box
Battery Valve
Box Bracket
1/4-20 Screw
5/16 Lockwasher
Attach Battery Valve Box
Bracket at this location