2
S19-672, S19-671
Installation
10/19/2012
Bradley•
215-321B Rev. V; ECN 12-05-003C
IMPORTANT
Read this installation manual completely to ensure proper installation, then file it with the
owner or maintenance department. Compliance and conformity to drain requirements and
other local codes and ordinances is the responsibility of the installer.
Separate parts from packaging and make sure all parts are accounted for before discarding
any packaging material. If any parts are missing, do not begin installation until you obtain
the missing parts.
The inspection and testing results of this equipment should be recorded weekly to verify
proper operation. This equipment should be inspected annually to ensure compliance with
ANSI Z358.1.
Workers who may come in contact with potentially hazardous materials should be trained
regarding the placement and proper operation of emergency equipment per ANSI Z358.1.
For questions regarding the operation or installation of this product, visit www.bradleycorp.
com or call 800.BRADLEY (800.272.3539).
Product warranties and service parts information may also be found under ”Products” on our
web site at www.bradleycorp.com.
This unit is to be used with tepid, potable water as defined by ANSI Z358.1. (Note: avoid
prolonged exposure to ambient heat sources above 100° F, or below 60° F).
Installation
THIS
SIDE
UP
Packing List
•
•
•
•
P.O
. Bo
x 309,
Menomonee F
alls,
WI 53051
R
TEST
THIS
UNIT EA
CH
WEEK
Test-operate v
alv
e(s) eac
h week and sign
belo
w.
Repor
t an
y malfunctions immediatel
y.
Ventil(e) w
öc
hentlic
h im
Testbetrieb prüf
en,
bestätigt
dur
ch Unter
sc
hrift.
Jeglic
he Störung sof
or
t melden.
Date
Datum
Date
Signed
Unter
sc
hrift
Signe
Date
Date
Date
Signed
Signed
Signed
DIESES GERÄ
T 1ST
W
ÖCHENTLICH ZU
PR
ÜFEN.
ESSAI HEBDOMA
DAIRE
Test le f
onctionnement des v
alves
c
haque semaine et
signe en bas.
S'il y à quelqu
e
ch
ose qui ne v
a pas fait
un rappor
t immédiatement.
1-800-772-6733
A Fisher Scientific Company
Fisher Safety
NOTICE! Avoid cleaners containing organic solvents, alcohols, and hydrocarbons.
Rinse with water after cleaning.
Supplies and Tools Required:
•
Pipe sealant
•
Air pressure equipment or supply (clean and free of oil and contaminants) capable of up to 100 psi.
•
Sign-mounting hardware
•
Adjustable wrench
60˚ F
100˚ F