Braaap MotoE 10000W, User Manual

Page: 25 / 35

- 25 -
Riding the MotoE 10000W
Once you have turned the key in the ignition, your bike is on and ready to start
riding. Make sure the side stand is up. Turn the throttle handle toward yourself
and the bike will start to roll forward.
Driving on slopes
When driving on steep slopes, the motorcycle will lose speed. If the throttle
is not engaging quickly, shift the power selection to a higher setting to get
more performance. You should shift power selection quickly to avoid losing
too much momentum.
Use Brake and Parking
When riding, the brake levers automatically cut the throttle. When coming to
a stop at lights or parking the bike, you will have to get used to balancing
when to activate the brakes and when to make use of the throttle.
Safely Parking your MotoE 10000W
The motorcycle should be parked on firm ground.
If the motorcycle needs to be parked by the side stand on a slope, put one of the
wheels in the gutter if possible. Lock the steering and set the alarm to
ensure security.
Caution:
Inexperienced riders often use only the rear brake. Please note this will
aggravate rear brake wear and lengthen braking distance .
Warning:
The higher the speed, the longer the braking distance is. Please ensure safety
distance between your motorcycle and other motorcycles, vehicles, or objects.
Warning:
It is very dangerous to use only the fore or rear brake; this may lead to
skidding or losing control. You should be very careful to use brakes on wet
roads. Sudden braking on slippery or bumpy roads is extremely dangerous to
properly reducing speed. Attempt to use both brakes together